Samsung OM46D-K User Manual Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 165
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
Off
The message No Signal will appear if no input signals are detected.
The Standby Control option is only enabled when Source is set to PC, DVI, HDMI1, HDMI2 or DisplayPort.
If No Signal is displayed although a source device is connected, check the cable connection.
If No Signal Message is set to Off,the No Signal message does not appear.
If this is the case, set No Signal Message to On.
On
Power-saving mode will activate if no input signals are detected.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
Power on only: Set the power button to turn on the power.
Power on and off: Set the power button to turn on/off the power.
Network Standby
This feature keeps the network power on when the product turns off.
Off / On
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Network Standby
O
On
Auto
Power on only
O
-
The displayed image may differ depending on the model.
Page view 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 164 165

Comments to this Manuals

No comments