Samsung SEK-2000 User Manual download pdf (Page 128)

122

Changing the 3D Mode

Picture > 3D > 3D Mode

Try Now

Launch 3D and then select 3D Mode under Picture > 3D.

Choose from the 3D modes that appear on the screen. Supported 3D Mode may vary depending

on the 3D content.

3D Mode is automatically configured for most 3D content.

The following 3D Mode is available. However, mode availability may vary depending on the 3D

content's format.

The supported resolutions vary for each mode. Refer to the "Supported Resolutions for 3D Modes" section

for more information.

●

Of f

(Off)

Deactivates 3D viewing.

●

(Normal)

Converts normal images to 3D images.

Some formats do not support this mode.

●

(Left / Right)

Splits a single image into left and right overlapping images to create the 3D effect.

●

(Top / Bottom)

Splits a single image into top and bottom overlapping images to create the 3D effect.

●

(Horizontal Line)

Switches between left and right images one horizontal line at a time.

●

(Vertical Line)

Switches between left and right images one vertical line at a time.

●

(Pixel)

Switches between left and right images one pixel at a time.

●

(Frame)

Switches between left and right images one frame at a time.

The (Horizontal Line), (Vertical Line), and (Pixel) settings can only be selected when the

computer's resolution is set to 1920x1800, or the computer is connected to the TV via an HDMI-DVI cable.

The (Frame) setting can only be selected when the computer's resolution is set to 1920x1080 and the

frequency to 60Hz.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 188 189

No comments

Samsung SEK-2000 User Manual Page 128