Samsung UM55H-E User Manual download pdf

Quick Setup Guide

The colour and the appearance may differ depending on the product, and the speciﬁ cations are

subject to change without prior notice to improve the performance.

Download the user manual from the website for further details.

http://www.samsung.com/displaysolutions

UH55F-E UM55H-E

BN68-07486G-00

The terms HDMI and HDMI High-Deﬁ nition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

Reverse Side

OUT

CONTROL IN

DP IN

HDMI IN 1

HDMI IN 2

DVI IN

(MAGICINFO)

RGB IN

USB

DP OUT

(LOOPOUT)

OUT

RS232C

OUT

AUDIO

RJ45

1 Receives the remote control signal via the external sensor

board and outputs the signal via LOOP OUT.

2 Supplies power to the external sensor board or receives the

light sensor signal.

DVI IN: Connects to a source device using a DVI cable or HDMI-DVI

cable.

MAGICINFO: To use MagicInfo, make sure to connect the DP-DVI

cable.

4 Connects to a source device using an HDMI cable.

5 Connects to a PC using a DP cable.

6 Connects to a source device using a D-SUB cable.

7 Connects to another product using a DP cable.

8 Receives sound from a PC via an audio cable.

9 Connects to the audio of a source device.

0 Connects to MDC using an RS232C adapter.

! Connect to a USB memory device.

(Only for update purpose)

@ Connects to MDC using a LAN cable.

Issues Solutions

The screen keeps

switching on and off.

Check the cable connection between the

product and PC, and ensure the connection

is secure.

No Signal is displayed

on the screen.

Check that the product is connected

correctly with a cable.

Check that the device connected to the

product is powered on.

Not Optimum Mode is

displayed.

This message is displayed when a

signal from the graphics card exceeds

the product’s maximum resolution and

frequency.

Refer to the Standard Signal Mode Table and

set the maximum resolution and frequency

according to the product speciﬁ cations.

The images on the

screen look distorted.

Check the cable connection to the product.

The screen is not clear.

The screen is blurry.

Adjust Coarse and Fine.

Remove any accessories (video extension

cable, etc) and try again.

Set the resolution and frequency to the

recommended level.

The screen appears

unstable and shaky.

Check that the resolution and frequency of

the PC and graphics card are set within a

range compatible with the product. Then,

change the screen settings if required by

referring to the Additional Information on

the product menu and the Standard Signal

Mode Table.

There are shadows or

ghost images left on

the screen.

Issues Solutions

The screen is too bright.

The screen is too dark.

Adjust Brightness and Contrast.

White does not really

look white.

Go to Picture and adjust the White Balance

settings.

The product will turn

off automatically.

Go to System and make sure Sleep Timer is

set to Off.

If a PC is connected to the product, check

the power status of the PC.

Make sure the power cable is connected

properly to the product and power outlet.

If the signal from a connected device is not

detected, the product automatically turns

off after 10 to 15 minutes.

There is no sound. Check the connection of the audio cable or

adjust the volume.

Check the volume.

The volume is too low. Adjust the volume.

If the volume is still low after turning it up

to the maximum level, adjust the volume on

your PC sound card or software programme.

The remote control

does not work.

Make sure that the batteries are correctly in

place (+/-).

Check if the batteries are ﬂ at.

Check for power failure.

Make sure that the power cord is connected.

Check for any special lighting or neon signs

switched on in the vicinity.

Troubleshooting Guide

Checking the Components

External sensor KIT

1 Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

- Keep the area between the remote sensor and remote

control obstacle-free.

2 Light sensor

Automatically detects the intensity of ambient light around a

selected display and adjusts the screen brightness.

3 Power indicator

The power indicator will turn off when the product is turned on.

It will blink in power-saving mode.

4 POWER button

Use this button for turning the LCD Display on and off.

SOURCE button

Switches from PC mode to Video mode.

Selects the input source that an external device is connected to

- Contact the vendor where you purchased the product if any

components are missing.

- The pictures may look different from the actual components.

Quick Setup Guide

Warranty card

(Not available in some

locations)

MagicInfo Software

DVD

Power cord

Batteries

(Not available in some

locations)

Remote Control

DP cable RS232C(IN) adapter

Holder-Ring (4EA) /

Screw (4EA)

UH55F-E_UM55H-E_INDIA_QSG_BN68-07486G-00.indd 1 2017-08-08 오전 10:40:02

1 2

Quick Setup Guide 1
RS232C OUT 2

Summary of Contents

Page 1 - Quick Setup Guide

Quick Setup Guide The colour and the appearance may differ depending on the product, and the speciﬁ cations aresubject to change without prior notice

Page 2 - RS232C OUT

SpecificationsModel Name UH55F-E / UM55H-EPanelSize 138.7 cmDisplay area1209.6 mm (H) x 680.4 mm (V)Power SupplyAC 100 to 240 VAC (+/- 10%), 60 / 50 H

Samsung UM55H-E User Manual

Browse online or download User Manual for Unknown Samsung UM55H-E. Samsung UM55H-E Quick start guide [tr]

Summary of Contents

More documents for Unknown Samsung UM55H-E

Comments to this Manuals

Samsung UM55H-E User Manual

Browse online or download User Manual for Unknown Samsung UM55H-E. Samsung UM55H-E Quick start guide [tr]

Summary of Contents

More documents for Unknown Samsung UM55H-E

Comments to this Manuals

Related products and manuals for Unknown Samsung UM55H-E