Samsung WF365BTBGWR/A2 User Manual download pdf (Page 27)

cleaning and maintaining your washer _27

CLEANING THE DEBRIS FILTER

We recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.

1. Open the filter cover by pressing and then pulling the

handle of the filter cover with your finger.

2. Holding the drain cap, pull the drain tube that

is hooked on the guide hook to the front. Do

not pull the drain tube with excessive force.

3. Place a bowl under the washing machine to

catch any remaining water. Then, hold the

drain tube with one hand, and turn the drain

cap counter clockwise with the other hand to

separate it from the drain tube.

4. Drain the remaining water completely.

5. Turn the debris cap counterclockwise, and then pull

the debris cap and debris filter assembly out of the

washer.

6. Wash any dirt or other material from the

debris filter. Make sure the drain pump

propeller behind the debris filter is not

blocked.

7. When you have finished cleaning the filter, insert the debris

cap and filter assembly back into the washer. Turn the

debris filter cap clockwise until the indicator on the debris

filter cap is in the 12 o’clock position, pointing to the

indicator on the washer.

8. Re-attach the emergency drain cap to the drain tube, and

then hook the tube to the hook guide.

9. Re-install the filter cover.

Debris filter cap

Filter cover

Step 2Step 1

Drain cap

Debris filter

cap

Debris filter

03 cleaning and maintaining

WF361_363_365-02832J-07_EN.indd 27 2014-2-22 15:58:21

1 ... 26 27 28 ... 132

No comments

Samsung WF365BTBGWR/A2 User Manual Page 27