Samsung WF42H5000AW/A2 User Manual download pdf (Page 31)

English _31

SELF CLEAN+

Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.

1. Press the Power button.

2. Press the Self Clean+ button.

• Once the Self Clean+ button is pressed, the only

function that can be set is Delay End.

3. Press the Start/Pause button.

• When you press the Start/Pause button, Self

Clean+ begins.

• Using Self Clean+, you can clean the drum, tub and diaphragm without using a cleansing

agent.

• Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the

laundry or a problem with the washing machine.

• Ifyouwanttouseadrumcleansingagent,useonly1/10oftheamountofthedrum

cleansing agent recommended by the cleansing agent manufacturer. (When using a

powder-type cleansing agent , remove the liquid detergent

compartment.)

The Self Clean+ Auto Indicator Function

• If the “Self Clean+” button is lit after a wash, it indicates

that tub (drum) cleaning is required. In this case, remove

the laundry from the washing machine, turn the power on,

and clean the drum by running Self Clean.

• If you do not run Self Clean+ after every 40 washes, the

“Self Clean+” indicator turns o after one hour. However,

the “Self Clean+” indicator will light again after ﬁve

washes. Not running Self Clean+ at this point will not cause

a problem with the washing machine.

• Although the Self Clean+ Auto Indicator appears once a month or so, the frequency may

dier depending on the number of times the washing machine is used.

04 maintaining your washer

CAUTION

BETTER_WF42H5000-03397A-13_EN.indd 31 2018/5/7 16:54:38

1 ... 30 31 32 ... 132

No comments

Samsung WF42H5000AW/A2 User Manual Page 31