Samsung WF56H9100AG/A2 Manual download pdf (Page 31)

English _31

SELF CLEAN+

Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.

1. Press the Power button.

2. Press the Self Clean+ button.

• Once the Self Clean+ button is pressed, the

only function that can be set is Delay End.

3. Press the Start/Pause button.

• When you press the Start/Pause button, Self

Clean+ begins.

• Using Self Clean+, you can clean the drum without using a cleansing agent.

• Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the

laundry or a problem with the washing machine.

• Ifyouwanttouseadrumcleansingagent,useonly1/10oftheamountofthedrum

cleansing agent recommended by the cleansing agent manufacturer. (When using a

powder-type cleansing agent, remove the liquid detergent compartment.)

The Self Clean+ Auto Indicator Function

• If the “Self Clean+” button is lit after a wash, it indicates that

tub (drum) cleaning is required. In this case, remove the

laundry from the washing machine, turn the power on, and

clean the drum by running Self Clean+.

• If you do not run Self Clean+ the “Self Clean+” indicator

turns o after one hour. However, the “Self Clean+”

indicator will light again after ﬁve washes. We strongly

recommend you run Self Clean+ when the indicator lights.

However, not running Self Clean+ will not prevent the

washer from running.

• Although the Self Clean+ Auto Indicator appears once

a month or so, the frequency may dier depending on the number of times the washing

machine is used. In most cases, the Self Clean+ indicator lights after every 40 washes.

04 maintaining your washer

CAUTION

(USER)WF56H9100-03404A-02_EN.indd 31 2014/10/13 15:24:42

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 131 132

No comments

Samsung WF56H9100AG/A2 Manual Page 31