Samsung WF71F5E1W4W User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 220
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
English - 18
STEP 5 - Powering your washing machine
Plug the power cord into a wall socket, an AC 220 - 240 V / 50 Hz approved electrical outlet protected by a fuse or
circuit breaker. (For more information on the electrical and grounding requirements, refer to the Electrical supply
and grounding section on page 12.)
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin
cycle after
the installation is complete.
STEP 6 - Running Calibration Mode
Your Samsung washing machine detects the weight of the laundry automatically. For a more accurate weight
detection, it is recommended running Calibration Mode immediately after installing the washing machine. Follow
the steps below to run Calibration Mode.
Before running Calibration Mode, make sure that there is nothing in the drum or on top of the washing
machine.
1. Turn the washing machine off.
2. Press the Power
button while holding down the Temp. and Delay End buttons simultaneously. The
washing machine will turn on and CLB will appear on the display.
3. Press the Start/Pause
button to start Calibration Mode.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When Calibration Mode is complete, End appears on the display and the washing machine will turn off
automatically.
6. The washing machine is now ready for use.
Untitled-1 18 2014-03-19 �� 12:25:51
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 219 220

Comments to this Manuals

No comments