6_ safety information
SEVERE WARNING SIGNS FOR INSTALLATION
It is recommended that The installation of this appliance be performed by a qualifi ed
technician or service company.
- Failure to do so may result in electric shock, fi re, an explosion, problems with the
product, or injury.
- The shipping bolts must be removed before operation of the mashine, failure to remove
the bolts may cause damage to the machine.
The appliance is heavy, take care when lifting it
Plug the power cord into an AC 220-240V / 50Hz wall socket or portable electric outlet
device for connecting this appliance and use the socket for this appliance only. In addition,
do not use an extension cord.
- The electrical outlet should be protected from splashes and water ingress.
- Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fi re.
- Ensure that the power voltage, frequency and current are the same as those of the
product specifi cations. Failure to do so may result in electric shock or fi re. Plug the
power plug into the wall socket fi rmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fi re.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
- All packaging materials should be disposed off in an enviromentally suitable manner.
If the appliance or power plug or power cord is damaged, contact your supplier or nearest
service centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fi re, an explosion, or problems with the product
- Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Do not install this appliance near a heater, infl ammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location of low temperature
- Frost may cause tubes to burst
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fi re.
Do not use an electric transformer.
- It may result in electric shock or fi re.
Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fi re.
safety information
WARNING
WF8750LS-02591X-03_EN.indd Sec2:6WF8750LS-02591X-03_EN.indd Sec2:6 2011-05-31 9:25:492011-05-31 9:25:49
Comments to this Manuals