Samsung SONOACE PICO User Manual download pdf (Page 31)

Chapter3. Setting 3 - 31

Setting Peripheral Devices

The following describes how to set up the video output type, video input type, printer, foot switch

and network. Select the Peripherals tab in the Setup menu.

[Figure 3.27 Peripherals Setting window]

■ Video Output Type

Set the output type of the VCR Port as NTSC or PAL. The setting is applied immediately

after setup.

■ Foot Switch

This assigns functions to the left and right pedals of the foot switch. Four options are

available: Dual, Store, Freeze and Update.

■ Printer

Select a printer to use. Compatible printers for the this system are the HP1200LP, HP

Desk jet 5550, HP Desk jet 6122, HP Desk jet 880C, and HP Desk jet 895C. After

connecting a USB printer to the USB port of the system, select the printer type on the

screen and click Ok. The printer can then be used immediately.

The USB printer can only be used to print out Report and SonoView screens.

■ Network Setting

The IP address of the network to which the system is connected is set in this menu,

together with other network related values. When ‘Using Dynamic IP Configuration’ is

selected, the IP value is automatically set up in the system. If a user enters a wrong IP

address, the system cannot be connected to the network. After network setting, click the

Apply.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 40 41

No comments

Samsung SONOACE PICO User Manual Page 31