Samsung WAM551-ZA User Manual download pdf (Page 30)

Connecting with NFC function

You can connect the M5 to Bluetooth devices easily by gently touch the smart device to the

mark on the top panel of the M5.

Connect your NFC compatible device to enjoy music with high quality stereo sound, all without

wires.

1 Plug the M5 into an electrical outlet.

Turn on the NFC function on your Smart device, and then gently touch the device to the

mark on the top panel of the M5.

The Bluetooth screen appears on your Smart device.

Select OK.

5 Select the desired track to play from your smart device's music list.

The M5 plays the track you selected.

NOTES

To disconnect the Bluetooth connection, gently touch the smart device to the

mark on the top

panel of the M5 again.

Please be careful not to disturb other buttons around the NFC tag.

Do not place or play back your NFC device on top of the NFC tag on the M5. Vibrations from the

music may cause the device to tip over and cause the M5 to disconnect or damage the device.

The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.

The position of the NFC antenna differs on different devices. Check where the NFC antenna is before

connecting.

If your device is covered with a thick case, the connection may not succeed.

The

mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in

other countries.

If you unplug the M5, the NFC connection is terminated. To re-establish the connection, plug the M5

into an outlet, and then set the NFC connection again.

VOLUME

Connect

Smart device

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

No comments

Samsung WAM551-ZA User Manual Page 30