Samsung WAM551-ZA User Manual download pdf (Page 36)

Adding a HUB

An M5 and a HUB may not pair successfully if the M5 and HUB are too far apart or are on

different floors.

In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.

The additional HUB amplifies the signal and lets you pair the M5 to the closest HUB.

1 Set the HUB that is connected to the wireless router

to Pairing mode by pressing its SPK ADD button for 1

second.

2 Plug in the new HUB you are using as an extender,

and then press its SPK ADD button for 10 seconds.

3 The newly added HUB's LED indicators turn off and

on, and it switches to Repeater mode.

4 Once the connection between the two HUBs has been

established, the added HUB's (

) indicator stops

blinking.

NOTES

If your smart device is not connected to the wireless router

with a Wi-Fi connection, the M5 will not appear on the

Samsung Multiroom app.

Place the HUB that is in Repeater mode in an appropriate

location between the M5 and the HUB that is connected to the wireless router.

You can set only one HUB to Repeater mode.

Relocating the M5

When relocating your M5, refer to the below table.

Wireless router

HUB

If you want to connect your M5 to the

current wireless router.

If you want to connect your M5 to a

different wireless router.

Without a HUB

Turn off the M5, relocate it and then turn

it on.

Turn off the M5, relocate it, then establish

the new connection as described in the

installation instructions on pages 18

through 28.

Press here

With a HUB

Connect a LAN cable between the HUB

and the new wireless router, turn on the

HUB, and then turn on the M5.

HUB

Used as a

extender

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 77 78

Comments to this Manuals

No comments

Samsung WAM551-ZA User Manual Page 36

Comments to this Manuals

Related products and manuals for Audio Samsung WAM551-ZA