Samsung PS42PNSB User Manual download pdf (Page 12)

ENG

Connecting to an Aerial (or Cable Television Network)

To view television channels correctly, a signal must be received by

the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

1 In the first three cases, connect the aerial or network input cable to

the 75Ω coaxial socket on the rear of the Media Station.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp

and clear.

For further details, refer to:

◆ “Storing Channels Automatically” on page 18.

◆ “Storing Channels Manually” on page 20.

Rear of the

Media Station

Cable Television

Network

Connecting Speakers

Rear of the Media Station

➣

◆ The speakers MUST have more than 15watts rating (impedance 8Ω).

◆ The ferrite cores are used to attenuate undesired signals. When you connect the speaker wire

to the

EXTERNAL SPEAKER OUT (8Ω) connector, bind the speaker wire round the ferrite core

to secure it.

Rear of the PDP

Connect the speaker audio cable to the external speaker output jack on the rear of the Media Station

matching the “+” and “-” ends of the cable with the diagram on the Media Station.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

No comments

Samsung PS42PNSB User Manual Page 12