Samsung PS42PNSB User Manual download pdf (Page 13)

Switching On and Off

ENG

If your Media Station isn’t turned on when the power button is

pressed, please check if the “TV” mode has been chosen by

pressing the “Select” button.

1 Plug the mains lead of the PDP and Media Station into an

appropriate socket.

2 Connect the video cable between the DISPLAY SIGNAL IN on the

rear of the PDP and the

DISPLAY SIGNAL OUT on the rear of the

Media Station.

3 Press the POWER button on the front panel of the Media Station

or remote control to switch the display on.

☛

◆ If you have purchased this PDP in the United Kingdom,

refer to page 55 for further instructions on plug wiring.

◆ Do not connect the power cord between PDP and

Media Station. Otherwise, the

EMI characteristic will

become worse because power input and output

signals interrupt each other.

◆ The ferrite core is used to attenuate undesired signals.

When you connect the power cord to the

POWER IN

connector on the rear of the Media Station, bind the

power cord round the ferrite core to secure it.

Rear of the Media Station

Video Cable

Rear of the PDP

Power cord

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

No comments

Samsung PS42PNSB User Manual Page 13