Samsung HT-C9950W User Manual download pdf (Page 27)

English 27

02 Connections

Connecting The Speakers

Press down the terminal tab on the back of the speaker.

Insert the black wire into the black terminal (–) and the red wire into

the red (+) terminal, and then release the tab.

Connect the connecting plugs to the back of the Subwoofer by

matching the colours of the speaker plugs to the speaker jacks.

With the product turned off, insert the TX card into the TX Card

Connection(WIRELESS) on the back of the Subwoofer.

Hold the TX card so that the label "WIRELESS" faces leftward and

insert the card into the port.

The TX card enables communication between the product and the

wireless receiver module.

Connect the left and right surround speakers to the wireless receiver

module.

Plug the power cord of the wireless receiver module in the wall outlet.

Turn on the product. The product and wireless receiver module will

now communicate with each other and you will hear sound from the

Surround speakers.

CAUTION

Before connecting the speakers, connect the main unit to the subwoofer using the system cable.

See page 22.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.

Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their

hands or alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).

Do not insert any other card except the TX card dedicated to the product.

If a different TX card is used, the product may be damaged or the card may not be removed

easily.

Do not insert the TX card in the reverse direction.

Insert the TX card when the product is turned off. Inserting the card when it is turned on may

cause a problem.

The wireless receiving antenna is built into the wireless receiver module. Keep it away from water

and moisture.

For optimal listening performance, make sure that the area around the wireless receiver module

location is clear of any obstructions.

If no sound is heard from the wireless surround speakers, switch the mode to DVD 5.1 channel or

Dolby Pro Logic

If no sound is heard from the surround back speakers, switch the mode 7.1channel or Dolby Pro

Logic

In 2-CH mode, no sound will be heard from the wireless surround speakers.

•



Black

Red

TX card

HT-C9950W_CIS_ENG-0817.indd 27HT-C9950W_CIS_ENG-0817.indd 27 2010-08-17  4:52:162010-08-17  4:52:16

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Comments to this Manuals

No comments

Samsung HT-C9950W User Manual Page 27

Comments to this Manuals

Related products and manuals for Blu-Ray players Samsung HT-C9950W