Samsung MAX-C670 User Manual download pdf (Page 4)

To take full advantage of your new mini-compact system, follow

these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the

sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc

compartment easily.

Place the loudspeakers at a reasonable distance on either side of

the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed

at an equal distance above the floor.

Where to Install Your Mini-Com-

pact System

Connecting your System to the

Power Supply

Insert or replace remote control batteries when you:

Purchase the mini-compact system

Find that the remote control is no longer operating correctly

When replacing the batteries, use a new set of batteries and

never mix alkaline and manganese batteries.

Place your thumb on the position marked on the battery

compartment cover (rear of the remote control) and push the cover in

the direction of the arrow.

Insert two AAA, LR03 or equivalent batteries, taking care to respect

the polarities:

+ on the battery against + in the battery compartment

– on the battery against – in the battery compartment

Replace the cover by sliding it back until it clicks into position.

If you will not be using the remote control for a long time,

remove the batteries to prevent corrosion.

Inserting Remote Control Batteries

The auxiliary input can be used to take advantage of the

sound quality of your mini-compact system when listening to

other sources.

Examples

: A television

A video disc player

A Hi-Fi stereo video cassette recorder

To connect to the external source, the source must have an

audio output. In addition, you need an RCA connection cable.

Set the system to standby mode and disconnect it and the external

source from the main socket.

Connect the audio cable to the rear of the mini-compact system.

Connect the... To the connector marked...

Red jack R (right)

White jack L (left)

For optimum sound quality, do not invert the right and left

channels.

Plug the system back into the main socket and press

STANDBY/ON to switch it on.

Select the AUX source by pressing AUX.

Result

: AUX is displayed.

Switch the external source on.

Adjust the volume and balance as required:

Volume Equalizer

Example: You can watch a film and take advantage of stereo sound

provided that the original sound track is in stereo (as if you

were in a cinema).

Connecting to an External Source

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the

voltage.

Check the position of the voltage selector on the rear of the system

(OPTIONAL).

Plug the main lead into an appropriate socket.

Press the STANDBY/ON button to switch your mini-compact system

on.

Rear Panel View

1. FM Aerial Connector Terminal

2. AM Aerial Connector Terminals

3. AUX-Input

4. Speaker Connector Terminals

5. Voltage Selector(option)

CD SYNCHRO

1 2 3 4 5 6 7 8 9 ... 13 14

Comments to this Manuals

No comments

Samsung MAX-C670 User Manual Page 4

Comments to this Manuals

Related products and manuals for CD players Samsung MAX-C670