Samsung H03 User Manual download pdf (Page 23)

Installation and Connection 2-11

2-11 Connecting the Power and Charging the battery

2-11-1. Connecting the Power

Be sure to connect the power supply after all other required connections are completed.

1. Connect the adaptor's power cable to the [ ] port on the back of the projector.

2. Plug one end of the adaptor's power cord to the adaptor and the other end into a wall socket.

2-11-2. Charging the battery

1. Connect the battery to the projector.

2. Make sure the projector is turned off.

3. Connect the adaptor's power cable to the [ ] port on the back of the projector.

4. Plug the adaptor's power cord into an electrical socket. The battery starts charging automatically.

• The battery will not be used while the projector is connected to the mains outlet.

(If you connect the power supply, you can use the projector when the battery is not connected.)

We recommend that you keep the battery connected to the projector even when the projector is connected to a mains

outlet.

• The battery needs to be charged for about three hours if fully discharged. Do not turn on the projector when charging the

battery.

• Set <LED Mode> to <Eco> in <Settings> when the battery is fully charged. You can then play a video on <Internal

PC IN AV IN

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

No comments

Samsung H03 User Manual Page 23