Samsung H03 User Manual download pdf (Page 48)

3-6 Using

3-6 Firmware Update

Download the latest firmware version from the Samsung Electronics website (http://www.samsung.com) and install.

• As data saved in the internal memory can be deleted during an update, always back up your data.

• Only a USB memory device is supported for a firmware update.

• Do not remove an external (USB) memory device while an update is in progress.

• Do not operate any buttons during the update.

• Do not turn the projector off during the update.

• To confirm that the firmware has been successfully updated, go to <Settings> → <Support> → <Product Information>.

Before Firmware Update !

1. Prepare an external (USB) memory device.

2. Download the latest firmware for your projector model to your PC from the Samsung website.

3. Connect the USB memory device to the PC.

4. Copy the downloaded firmware to the USB memory device.

Updating the Firmware

1. Connect the USB memory device containing the latest firmware to the projector.

2. Select <Settings> → <Support> → <Firmware Update> in the main menu page.

3. You will see the current firmware version and the latest firmware version available.

4. Select <Update Now> to begin.

5. After the firmware is updated, the projector is automatically powered off.

6. Power on the projector and check the firmware version.

Settings

Category Option

Firmware Update

Open Source License

Reset Settings

Product Information

General

Support

ate

ption

irmware Updat

pen Source Licens

Reset Sett

ngs

Product Informatio

enera

uppor

Firmware Update

Please, do not turn off the power.

The power will be off automatically

after update is finished.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54

No comments

Samsung H03 User Manual Page 48