Samsung CHT-420 User Manual download pdf (Page 21)

4140

If you want your videotapes to play automatically when you insert

them, turn on Auto Play.

NOTE: Only tapes that are missing the Record Safety Tab will

play automatically when inserted.

1 Open the “MENU”

With the DVD in stop mode, press the MENU button.

2 Select “VCR”

Using the up/down and left/right buttons, move the selection arrow

to “VCR Function Setup,” then press ENTER to select.

3 Select “Auto Play”

Move the selection arrow to “Auto Play,” then press right to select

from the following options:

• On - The VCR will automatically begin playing a video tape

when it is inserted, as long as the safety tab of the cassette has

been removed.

• Off - Auto play is disabled.

4 Tape Length

Press the left button to select the video cassette length.

This information is usually printed on the tape box. The menu

cycles through: T120, T160 or T180. Once the type of cassette is

set, the VCR can display the amount of time remaining on the tape

when you press the INFO. button.

5 Auto Repeat

In the VCR Function Setup “ Auto Repeat” sets the VCR to

play a tape repeatedly [unless a tape control is activated (stop, fast

forward or rewind)].

The DVD-VCR allows you to playback high quality S-VHS tapes.

1 Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

2 Start Playback

Press Play/Pause on the remote control to begin playback of the S-

VHS tape.

Auto Play

S-VHS Playback

MAIN MENU

VCR Function Setup

RETURN

❷

➛❿

ENTER

Program Clock Install Exit

DVD VCR Options Language

VCR

VCR FUNCTION SETUP

RETURN

❷

Tape Length T120

Auto Play

➛➛ ❿❿

Auto Repeat Off

Off

The Tracking adjustment removes the white lines that sometimes

appear during playback because of slight differences in recording

decks. The TRK button will automatically align the recorded tracks

with the playback heads to solve this problem. You may also set

tracking manually.

1 Adjust Tracking Manually

During playback, press the TRK



or TRK

❷

buttons to move the

white lines out of the picture.

2 Ajust Tracking Automatically

If you press the ATR key on the remote control during VCR

playback, the tracking on the VCR will be set automatically.

While a videotape is playing, you can enjoy a variety of special

playback features, including Still, Frame Advance, Skip, Repeat, and

more. Press the Play button again to resume normal playback.

1 Still

From Play mode, press Play/Pause to still a single frame.

2 Cue/Review

From Play mode, press F.Forward (

❿❿

) or Rewind (

➛➛

) to

cue/review at two speeds:

• Picture Search — Press and release to advance the tape

forward or backward at 5 times normal speed.

• Jet Search — Press and hold to advance the tape forward or

backward at 7 times normal speed.

3 Repeat

From Play mode, press Repeat to review the last 5 seconds of tape

(SP mode).

Special VCR Playback Features

Press the INFO. button to see the

current status of the VCR deck, as well

as the tape counter position and

record speed.

PLAY

0:00:00 SP

Tracking Adjusting Picture Alignment Automatically

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

Comments to this Manuals

No comments

Samsung CHT-420 User Manual Page 21

Comments to this Manuals

Related products and manuals for DVD players Samsung CHT-420