Samsung DA99-00926B Specifications download pdf (Page 24)

10. INSTALLATION OF THE WATER LINE

- Shut off the main water supply line and turn the

Ice maker to the off position.

- Locate the nearest cold drinking water line.

- Follow the instructions in the ice maker

installation kit.

- After connecting the water supply with water

filter, turn on water supply and flush 4 or more

gallons into a bucket to clear the water filter

• This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these

instructions carefully to minimize the risk of expensive water damage.

• Banging pipes (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and

lead to water leakage or flooding. Call a qualified plumber to correct the problem before installing the water

supply line to the refrigerator.

• To prevent burns and product damage, do not hook up the water line to the hot water line.

• Do not install the icemaker tubing in areas where temperatures fall below freezing.

• When using any electrical device (such as a power drill) during installation, be sure the device is insulated or

wired in a manner to prevent electric shock.

• All installations must be in a accordance with local plumbing code requirements.

- Slip the compression nut through the plastic tube.

- After inserting the compression nut into plastic tube,

tighten the compression nut onto 1/4” compression

fitting.

- You can purchase the necessary parts through BEST BUY.

- Waterline must be connected to drinkable water only

- Compression fitting and nut will be given inside of ice bucket.

NOTE

Water line Kit and water filter are not covered by Samsung Warranty and manufacturer(or dealer, installer)

of them should be responsible for the defect and all the loss caused by water filter & water line kit .

- Filter should be replaced according to manufacturer (or dealer)'s instruction.

- To order additional water filters, please contact the manufacturer (or dealer) of the filter.

NOTE

Do not overtighten the compression nut.

NOTE

- Slip the compression ferrule and nut on copper(or plastic)

tubing as shown.

Tighten the compression nut onto the compression fitting.

- Turn water on and check for any leakege.

Compression

Nut (Purchased)

Compression

fitting (Provided)

Ferrule

(Purchased)

Compression

Nut (Provided)

1. Cold Water line

2. Pipe Clamp.

3.Copper (or Plastic) line

4.Compression Nut

5.Compression Sleeve

6.Shut Off Valve

7.Packing Nut.

10-1)

Before You Install the water line

10-2)

Connecting to water supply line

10-3)

Connect the water line to the refrigerator

Household water line

Refrigerator

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 88 89

Comments to this Manuals

No comments

Samsung DA99-00926B Specifications Page 24

Comments to this Manuals

Related products and manuals for Fridges Samsung DA99-00926B