Samsung RF220NCTASG User Manual download pdf (Page 26)

26_ operating

USING THE CONTROL PANEL

Freezer/Fridge (Temperature

adjustment)

Press the Freezer or Fridge button until the desired

temperature is set. For lower temperature, press

the Freezer or Fridge button until more LED lights

(coldest). For higher temperature, press the Freezer

or Fridge button until less LED lights (colder).

Each time you press the Freezer or Fridge button,

temperature indicator will change in below order.

Power Freeze

RF221/RF220/RL225

This icon will light up when you activate

the Power Freeze function. Power Freeze

function generates cool air for 50 hours

continuously and it makes the inside of

the refrigerator cool faster. This function is

useful when you make ice more quickly.

When you have enough, just press and hold

the Freeze (Hold 3 sec for Power Freeze)

button again for 3 seconds to cancel the

Power Freeze function.

RL220

This icon will light up when you activate

the Power Freeze function. Power Freeze

function generates cool air for 50 hours

continuously and it makes the inside of

the refrigerator cool faster. When you have

enough, just press the Power Freeze button

again to cancel the Power Freeze function.

When you use this function the energy

consumption of the refrigerator will

increase. Remember to turn it off when you

do not need it and return the freezer to your

original temperature setting.

If you need to freeze large amount of food

stuff, activate Power Freeze function at

least 24 hours before.

Energy Saver

This LED will light up when you activate the Energy

Saver function. The Energy Saver function is

automatically set to “ON” when power is supplied

to the Refrigerator. If condensation occurs on the

doors, turn the Energy Saver function off.

In some places, water drop may be

generated on the door part. In this case,

it is recommended to turn off the Energy

saver function.

Ice Off

This LED will light up when you activate the Ice Off

function. In this case, the ice will not be produced.

Alram On/Off

If the door alarm is set to On, an alarm beeps if any

refrigerator door is left open for more than three

minutes. The beeping stops when you close the

door. The door alarm function is pre-set to On in

the factory. You can turn it off by touching and then

releasing this button. You can turn it back on in the

same fashion. The LED lights up when the function

is on.

Reverse Osmosis Water Supply

IMPORTANT:

The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet

valve of the refrigerator needs to be between 241

and 827kPa.

If a reverse osmosis water ﬁltration system is

connected to your cold water supply, the water

pressure to the reverse osmosis system needs

to be a minimum of 276 to 414kPa. If the water

pressure to the reverse osmosis system is less

than 276 to 414kPa:

• Check to see whether the sediment ﬁlter in the

reverse osmosis system is blocked. Replace

the ﬁlter if necessary.

• Allow the storage tank on the reverse osmosis

system to reﬁll after heavy usage.

• If your refrigerator has a water ﬁlter, it may

further reduce the water pressure when used

in conjunction with a reverse osmosis system.

Remove the water ﬁlter.

If you have questions about your water pressure,

call a licensed, qualiﬁed plumber.

DA68-02787A (EN)-05.indd 26 2017. 8. 9. �� 10:51

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments

Samsung RF220NCTASG User Manual Page 26

Comments to this Manuals

Related products and manuals for Fridges Samsung RF220NCTASG