Samsung RF266AEBP User Manual download pdf (Page 10)

10_Setting Up

Freezer / Flex zone door handle assembly

Please do not remove the Freezer / Flex Zone drawer. Handle can be attached without removing the door.

CAUTION

HOW TO ASSEMBLE THE HANDLES (CONT’D)

REMOVING THE REFRIGERATOR

If your entrance won’t allow the Refrigerator to pass easily

through it, you can remove the doors.

Disassemble the Refrigerator doors

1. With the door closed, remove the top table(

)

using a Philips screwdriver, and then disconnect the

wires(

). Remove hinge screws(

) and ground

screw(

)

2. Lift the door straight up to remove.

3. With a Philips head screwdriver, remove the two

screws(

) attached to the lower left and right

door hinges.

With an Allen Wrench(3/16”), remove the two hex

head bolts(

) attached to the lower left and right

door hinges.

Remove the lower left and right door hinges(

Tools you will need

Philips screwdriver 10mm Socket Wrench

Allen wrench(3/16”)

Flat-blade screwdriver Pliers

Setting up your French Door Refrigerator

OKOK

Tilt up the Handle bar and turn the wrench.

By using L-wrench, Fix the screw with the Longer part of it and

then fully tighten up with the Shorter part.

To best conceal the connection

points : Assemble the handles

with the mounting screws facing

down.

Put the handle on the xer

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 79 80

No comments

Samsung RF266AEBP User Manual Page 10