Samsung RF268AB User Manual download pdf (Page 13)

Setting up _13

01 SETTING UP

5. Position the top table ( 2 ) in place. Insert and tighten

the 3 screws into the top table with a philips screw

driver(+). With the doors open, reinsert the cap top

table ( 1 ) and close the doors.

REATTACHING THE REFRIGERATOR DOORS



dispenser door tube

The dispenser door tube ( 5 ) must be fully inserted to the marked

line to prevent water leakage from the dispenser.

CAUTION

4. Connect the dispenser door tube ( 5 ) and then

insert a clip on the coupler with pulling tube.

Connect the connector ( 4 ) on the left side door

and two connectors ( 3 ) at each side of the top

cap.

The clip is enveloped inside of the top cap.

When reattaching the top table, make sure that

the wires are not pressed or damaged by the

hinge cover.

After assembling, close the doors and check

to see whether the doors have gaps between

gaskets or are tilted. If you see a gap or tilt

please refer to “Adjusting the doors” on page 15.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 83 84

No comments

Samsung RF268AB User Manual Page 13