Samsung RF28JBEDBSG User Manual download pdf (Page 38)

English - 38

• Tilt up the front of the drawer and pull straight

towards you. Then, move the drawer slightly

in the direction of the arrow in the illustration

below, and then pull out.

To re-install

• Insert the drawer into the frame rails and push

back into place.

• Slide the bin in above the desired location and

push down until it stops.

The drawers need to be removed before

the glass shelf above them can be lifted

out.

4. Flex Zone

To remove the Flex Zone – Pull the Flex door

out to full extension. Lift the Flex Zone up, pulling

it to your body with both hands.

To re-install the Flex Zone – Open the Flex door

to full extension. Tilt the front of the Flex Zone up,

place the back of the Flex Zone onto the rails, and

then lower the front until the whole Zone rests on

the rails.

CAUTION

To remove the divider and the metal cooling

plate from the Flex Zone

1. Slide the divider to the end as shown.

2. As the divider has the width and length bars,

push the lower part of each bar inward to

unlock. See the pictures for details.

3. Hold the divider and pull up to remove.

4. Turn over the drawer to remove the metal

cooling plate.

The Drawer and Metal cooling plate are

heavy. It may cause a personal injury or

material damage.

CAUTION

DA68-02952K-01.indb 38 2018. 2. 20. �� 10:49

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 87 88

No comments

Samsung RF28JBEDBSG User Manual Page 38