Samsung RF30HBEDBSR User Manual download pdf (Page 33)

English - 33

OPERATING

• Tilt up the front of the drawer and pull it straight

out. Then, move the drawer slightly in the

direction of the arrow and pull it out of the

refrigerator. See the illustration below.

- To re-install : Insert the drawer into the frame

rails, and then push back into place.

- Slide each bin in above the desired location,

and then push down until it stops.

CAUTION

The drawers need to be removed before the glass

shelf above them can be lifted out.

5. Flex Zone

- To remove the Flex Zone : Pull the Flex door

out to full extension. Lift the Flex Zone up,

pulling it to your body with both hands.

- To re-install the Flex Zone : Open the Flex

door to full extension. Tilt the front of the Flex

Zone up, place the back of the Flex Zone onto

the rails, and then lower the front until the whole

Zone rests on the rails.

When the Flex Zone or LED lighting is not

working, check the connectors [ ( 1 ), ( 2 )

shown below ] for cracks or leaks.

1. Disassemble the Flex Door. Refer to page 13

for disassembly instructions.

2. Open the cover rail cap with a ﬂat-head screw

driver to examine the connectors.

(1)

(2)

Using the doors

Ensure that the doors close all the way and are

securely sealed.

When the refrigerator door is only partially open, it

will automatically close. If the door is opened more

than its auto close range, it will remain open. You

must close it manually.

DA68-03030A-06.indb 33 2016. 3. 31. �� 11:43

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 131 132

No comments

Samsung RF30HBEDBSR User Manual Page 33