Samsung RL726PCEW User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features
and functions of the appliance. By completing the following steps, your Refrigerator should be fully
operational.
1.PlacetheRefrigeratorinanappropriatelocationwithreasonableclearancebetweenthewalland
theRefrigerator.Refertoinstallationinstructionsinthismanual.(P8.Selectingthebestlocation
fortheRefrigerator)
2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the
doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get
slightly chilled and the motor will run smoothly.
4.AfterpoweringtheRefrigerator,itwilltakeafewhourstoreachtheappropriatetemperature.You
can store food and drinks in the Refrigerator after the temperature is sufficiently cool.
PhillipsHeadDriver(+) FlatHeadDriver(-) SocketWrench
(10mm)(forbolts)
HexWrench
(3/16inch)
(forMidhinge)
Hexwrench
(5/32inch)
(forMidhingeshaft)
Required Tools (Not provided)
REMOVING THE REFRIGERATOR DOORS
Some installations require door removal to transport the Refrigerator to its final location.
Donotremovethedoorifitisnotneeded.Beforeremovingthedoormakesureyoureadfollowingitems.
•Becarefulnottodropthedooranddoorscratchanddamagewhileremovingthedoor.
•Becarefulnottogetinjuredwhileremovingthedoor.
•Afterreattachingthedoor:
It is possible to have sweat by air leakage.
It is possible to have uneven door alignment.
It is possible to have more energy bills.
setting up _13
01 SETTING UP
Disconnect power to the Refrigerator before remove door.
WARNING
SETTING UP THE REFRIGERATOR
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Comments to this Manuals

No comments