Samsung RS267LABB Specifications download pdf (Page 50)

1. Disconnect the power cord of the refrigerator

2. Remove the fixed screws (6) of compressor

cover.

3. Slide up and take off the compressor cover to

see the machine compartment.

4. Press the tab in electric box cover to take out

by using a driver.

When the solenoids receive a signal from the micro-

processor, they supply water to the water dispenser

or the ice maker.

1. Remove bracket screw (1) from electric box.

2. Take the solenoids assembly out.

3. Disconnect water tubes (3).

The condenser Fan is located in the middle of

machine compartment. It cools down the sub-

condenser and the compressor.

1. Disconnect the condenser fan wire.

2. Remove screw (1) from the drain water tray.

3. Take the condenser fan assembly off.

The sub-condenser is located in the machine

compartment. The heat is extracted by

condenser fan.

1. Desolder the compressor discharge ＆

the sub-condenser outlet.

2. Take out the sub-condenser.

Machine Compartment

＆＆

Electric Box

5. DISASSEMBLY AND REASSEMBLY

5-4) Machine Compartment Disassembly

(+) driver

PCB-MAIN ASSY

Water Solenoids

Condenser Fan

Sub-condenser

Desoldering Point

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 91 92

No comments

Samsung RS267LABB Specifications Page 50