English 41
Setting up
Connecting the water line to the refrigerator
Loosen a
Remove
cap
Water Line from
unit
Water Line from
Kit
No gap
C
B
A
A
B
C
A
1. Remove the cap from water line on
the unit and insert compression nut
to the water line on the unit after
disassembling from provided water line.
2. Connect both water line from the unit
and water line in the kit.
3. Tighten the compression nut onto the
compression tting.
Be careful no gap between two items.
4. Turn water on and check for any
leakage.
NOTE
• Only connect the water line to a
drinkable water source.
If you have to repair or disassemble the
water line, cut off 6.5 mm of the plastic
tubing to make sure you get a snug, leak-
free connection.
CAUTION
• Before being used, the leakage in these
places should be examined.
• Samsung Warranty does not cover
WATER LINE INSTALLATION.
• It’ll be done at customer’s charge unless
the retail price includes installation cost.
• Please contact plumber or authorized
installer for the installation if needed.
• If water leakage occurs due to improper
installation, please contact installer.
DA68-03284A (EN)-01.indd 41DA68-03284A (EN)-01.indd 41 2015. 4. 2. 5:272015. 4. 2. 5:27
Comments to this Manuals