Installation and Operating Instructions Ceramic Glass HobC61RCCN / C61RCAST / C61RCBAL / C61RCDSTTo avoid the risk of accidents or damage to the hob,
8ENInstalling the Hob (Continued)Model : C61RCBAL, C61RCCN, C61RCDSTx4902100100490+1==C61RCCN_XSA-00043A_EN.indd 8 2007-02-22 ¿ÀÈÄ 2:05:16
9ENInstalling the Hob (Continued)Model : C61RCAST x4902100100490+1==C61RCCN_XSA-00043A_EN.indd 9 2007-02-22 ¿ÀÈÄ 2:05:36
10ENParts and FeaturesCooking zones and control panel129/215 mm148 mm148 mm170 mm265 mmSingle cooking zone 1300 WCasserole cooking zone 2540 WSingle c
11ENComponents1 Ceramic Glass Hob2 Installation Brackets3 Screws4 ScraperParts and Features (Continued)C61RCCN_XSA-00043A_EN.indd 11 2007-02-22 ¿À
12ENParts and Features (Continued)The key features of your appliance• Ceramic glass cooking surface: The appliance has a ceramic glass cooking surfac
13ENParts and Features (Continued)Safety shutoffIf one of the cooking zones is not switched off or the heat setting is not adjusted after an ex-tended
14ENHob UseUsing suitable cookwareBetter pans produce better results.• You can recognise good pans by their bases. The base should be as thick and fla
15ENHob Use (Continued)• Always position pots and pans before switching on the cooking zone.• Dirty cooking zones and pan bases increase power consump
16ENHob Use (Continued)Switching the appliance onTouch the “Lock ” sensor for approximately 3 seconds.The appliance is switched on using the “On / Of
17ENHob Use (Continued)Switching the appliance offTo completely switch off the appliance, use the “On / Off ” control sensor.Touch the “On / Off ” s
C61RCCN_XSA-00043A_EN.indd 2 2007-02-22 ¿ÀÈÄ 2:04:34
18EN If the heat setting is at and you want to turn the burner off, the sensor can be touched one additional time, and the heat setting will go to
19ENHob Use (Continued)Using the double cooking zoneBy using the double cooking zone, you can alternate between the smaller cooking zone and the large
20ENSwitching a cooking zone offTo switch off a cooking zone, return the setting to by using the control panel’s heat setting and touch sensors or
21ENHob Use (Continued)Switching the child safety lock off1. Touch the control sensor for approximately 3 seconds. An acoustic signal will sound as c
22ENHob Use (Continued)2. Use the or timer setting control sensors to set the desired amount of time, for ex-ample, 15 minutes, after which the c
23ENHob Use (Continued)Locking and unlocking the control panelAt any stage during the cooking process, the control panel, with the exception of the “O
24ENCleaning and CareHob Important: Cleaning agents must not come into contact with a heated ceramic glass surface: All cleaning agents must be r
25ENProblem Dirt1. Remove burnt-on sugar, melted plastic, aluminium foil or other materials with a glass scraper immediately and while still hot. I
26ENWarranty and ServiceFAQs and troubleshootingA fault may result from a minor error that you can correct yourself with the help of the following ins
27ENWarranty and Service (Continued)What does it mean when the burner does not glow red?• The selected temperature of the cooking zone is maintained
1ENContentsUsing This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Safety .
28ENTechnical Data Appliance dimensionsWidth 575 mmDepth 505 mmHeight 55 mmWorktop cut - out dimensionsWidth 560 mmDepth 490 mmCorner radius
29ENNoteC61RCCN_XSA-00043A_EN.indd 29 2007-02-22 ¿ÀÈÄ 2:07:06
30ENNoteC61RCCN_XSA-00043A_EN.indd 30 2007-02-22 ¿ÀÈÄ 2:07:06
31ENNoteC61RCCN_XSA-00043A_EN.indd 31 2007-02-22 ¿ÀÈÄ 2:07:06
Code No.:DG68-00043AC61RCCN_XSA-00043A_EN.indd 32 2007-02-22 ¿ÀÈÄ 2:07:06
2ENUsing This ManualPlease take the time to read this owner’s manual, paying particular attention to the safety information contained in the following
3ENSafety The safety aspects of this appliance comply with accepted technical standards and the German Appliance Safety Law. However, as manufacture
4ENSafety during use• This appliance is to be used only for normal cooking and frying in the home. It is not de-signed for commercial or industrial u
5ENInstalling the Hob Important: Be sure the new appliance is installed and grounded only by qualified personnel. Please observe this instruction.
6ENInstalling the Hob (Continued)Connecting to the mains power supplyBefore connecting, check that the nominal voltage of the appliance, that is, the
7ENInstalling the Hob (Continued)Installing into the countertop Make a note of the serial number on the appliance rating plate prior to installation
Comments to this Manuals