Samsung GS25 User Manual download pdf (Page 19)

_17

GAS CONNECTION

We recommend to check wether the appliance has been

foreseen for the kind of gas distributed.

The appliance must be connected to the gas piping in a

workmanlike way and in conformity with the regulations in

force which lay down the installation of a safety valve at the

end of the piping.

For butane and propane a pressure reducer conforming

to the standards in force may perform this task. The seal

gaskets must be in accordance with rules.

Once the gas appliance has been connected, check the

connection seal by means of soapy water.

The possible connections are:

1) by the insertion of a rubber tube in accordance

with the rules.

This tube must be connected directly on the

push-on connector, concerning the gas used,

and it must be blocked with a band.

In the last case, check the tube's printed date of

expiry and replace it before this date (Fig. 9A).

2) by rigid pipe in iron or copper.

3) by flexible tube in stainless steel with continuing

wall, with mechanical connection in accordance

with rules. The tube must be directly connected

to the manifold elbow (Fig.9B).

Concerning rubber flexible tubes, we remember

you:

to avoid the tube to be narrowed or crushed-

do not submit it to traction or torsion efforts-

to avoid contact with sharp edges, etc...-

to avoid contact with parts reaching -

temperatures over 70°C the ambient

temperature

to ensure that they can be checked for all their -

length.

Note: If the cooker has to be connected on the

opposite side, run the flexible tube as shown in

the figure 10.

GAS CONNECTING

1:Hose attachment for liquid gas

2:Hose attachment for natural gas

(G 1/2) -

ISO 228-1

fig. 9A

(G 1/2) -

ISO 228-1

fig. 9B

fig. 10

11 GAS CONNECTION

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Samsung GS25 User Manual Page 19

Comments to this Manuals

Related products and manuals for Ovens Samsung GS25