Samsung SP-S4223 User Manual download pdf (Page 41)

English-41

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,

depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different,

the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on “Control Panel” on the Windows start menu.

2. When the control panel window appears, click on “Appearance and Themes” and a

display dialog-box will appear.

3. When the control panel window appears, click on “Display” and a display dialog-box

will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution)

Optimum: 1024 x 768 pixels

If a vertical-frequency option exists on your display settings dialog box,

the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard

signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen

image has been optimized during manufacture.

PC Display

➢

• The PC text quality of HP-S4233 is optimum in XGA mode (1024 x 768@60Hz).

• The PC text quality of HP-S5033 is optimum in WXGA mode (1360 x 768@60Hz).

• The PC text quality of SP-S4223 is optimum in WVGA mode (848 x 480@60Hz).

• When this TV is used as a PC display, 32-bit color is supported.

• Depending on the manufacturer, your PC display screen might appear different.

(and depending on your particular version of Windows.)

Check your PC instruction book for information about connecting your PC to a TV.

• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4kHz (horizontal).

• In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the

SOURCE button on the remote control or SOURCE button on the side panel to enter a VIDEO mode. Also, make sure that the PC is connected.

• The interlace mode is not supported.

• The TV operates abnormally if a non-standard video format is selected.

• The table above conforms to IBM/VESA regulations and is based on using the Analog Input.

•“

✔

” mark means that this mode can be supported.

Video Signal

IBM PC / AT

Compatible

Resolution

(Dot X Line)

Vertical

Frequency (Hz)

640 X 350

720 X 400

640 X 480

800 X 600

848 X 480

1024 X 768

1280 X 720

1360 X 768

70.086

70.087

59.940

70.000

72.809

75.000

56.250

60.317

70.000

72.188

75.000

60.000

74.769

60.004

70.069

72.000

75.029

59.855

60.015

Horizontal

Frequency (KHz)

31.469

35.000

37.861

37.500

35.156

37.879

43.750

48.077

46.875

31.020

37.684

48.363

56.476

57.672

60.023

44.772

47.712

Vertical

Polarity

N/P

Horizontal

Polarity

N/P

HP-S4233

✔

HP-S5033

✔

SP-S4223

✔

Vid

IBM

Video S

IBM PC

Compa

BN68-00991J-00Eng 5/12/06 12:25 PM Page 41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

Comments to this Manuals

No comments

Samsung SP-S4223 User Manual Page 41

Comments to this Manuals

Related products and manuals for Plasma TVs Samsung SP-S4223