Samsung SVMi-4 User's Guide download pdf (Page 66)

the application, they would not be able to shut down the system or change the

passwords.

Subscriber Admin This effects only the GUI. This also works only with the

GUI and allows access to the following: Subscriber List, Display User Log, and

Status Screen.

Min Recorded Length This parameter sets the minimum record time that is to

be considered valid. It is specified in hundredths of seconds. A setting of 50

means 0.5 seconds or 500 milliseconds. The default value is 75. If this value is

too high, short recordings will be discarded. If it is too low, the system will

consider disconnects as a valid recording.

Dial Tone Trim Size This amount is trimmed off the end of any recorded mes-

sage that is terminated by dial tone. This parameter is measured in hundredths

of seconds.

Detect on leading edge Not used.

Minimum DTMF Duration This parameter controls the sensitivity of the DTMF

(touch-tone) detectors only during recording of voice prompts and announce-

ments. The value represents the minimum time period (in hundredths of sec-

onds) during which a tone must be valid in order to be accepted as a caller

entry. A lower value makes the SVMi-4 more sensitive to DTMF tones. If exces-

Programming - Page 63

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 123 124

No comments

Samsung SVMi-4 User's Guide Page 66