Samsung DB10E-TPOE User Manual download pdf (Page 158)

158

Preset Timing Modes

―

This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than

the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.

―

Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical

frequency to 60Hz using the CDT product before you exchange it with the LCD product.

Synchronization Horizontal Frequency

30 - 81 kHz

Vertical Frequency

48 - 75 Hz

Resolution Optimum resolution

1280 x 800 @ 60 Hz

Maximum resolution

1920 x 1080 @ 60 Hz

Maximum Pixel Clock

148.5 MHz (Analogue, Digital)

The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC

does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by

referring to the graphics card user manual.

Horizontal Frequency

The time required to scan a single line

from the left to the right side of the

screen is called a horizontal cycle. The

reciprocal number of a horizontal cycle

is called horizontal frequency. Horizontal

frequency is measured in kHz.

Vertical Frequency

The product displays a single image

multiple times per second (like a

fluorescent light) to display what the