Using the camera buttons to set the camera
Using the camera buttons to set the camera
The recording mode function can be set up by using the camera
Used for turning the camera’s power on/off.
If there is no operation during the specifi ed
time, the camera’s power will be turned off
automatically to save battery life.
Refer to page 60 for more information about
the auto power off function.
Used for taking an image or recording voice in the Recording mode.
starts the process for recording a movie
and the movie clip is recorded for as
long as the available recording time in
the memory allows. If you wish to stop
button down halfway activates the autofocus and
checks the condition of the fl ash. Pressing the
fully takes and stores the image. If you select voice memo recording,
the recording will start after the camera has fi nished storing the image
To focus on a subject not positioned in the centre of the picture, use the
Ensure the subject is in the centre of the autofocus frame.
button halfway. When the green auto focus frame
lights up, it means the camera is focused on the subject. Be careful
button all the way down to avoid taking an
button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press the
button completely to take the picture. If you release your fi nger
button, the focus lock function will be cancelled.
01:00 PM
2007 / 08 / 01
F 3.5
1/45s
F 3.5
1/45s
Comments to this Manuals