Samsung SNC-B5399 User Manual download pdf (Page 72)

setup screen

72_ setup screen

NETWORK SETUP

To set the video transfer mode

You can control the transfer rate according to the video transfer mode and network speed.

Select <Network> - <Streaming type>.

The Video Transfer setup window appears.

When done, click [Apply].

Your settings will be saved.

VNP streaming : You can set the

Samsung Protocol (VNP) for the

streaming service.

Protocol : Select a video transfer protocol from TCP*, UDP (Unicast)*, and UDP

(Multicast)*.

Speaking to the camera unit through microphone is not supported.

Multicast backbone (MBone) is not supported; you can access the camera only in the

multicast local network environment.

RTP streaming : You can set the RTP Protocol or the streaming service.

Protocol : Select a video transfer protocol from UDP (Unicast) and UDP (Multicast).

To set the DDNS

DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address

of a camera into a general Host Name so that the user can easily remember it and enables

connecting a camera with a fixed Host Name even if the IP address of the camera may be

dynamically changed.

Select <Network> - <DDNS>.

The DDNS setup window appears.

When done, click [Apply].

Your settings will be saved.

For checking the DDNS address, refer to "To check the DDNS address". (page 48)



1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 116 117

No comments

Samsung SNC-B5399 User Manual Page 72