Samsung NX58H5600SS Owner's Manual download pdf (Page 73)

maintaining your appliance _73

MAINTAINING YOUR APPLIANCE

How to set the oven for self-cleaning

1. Make sure the oven door is completely closed.

2. Press the SELF CLEAN pad on the oven control panel.

Press the pad once for a 2-hour cleaning cycle, twice

for a 3-hour cleaning cycle, or three times for a 4-hour

cleaning cycle.

Pressing the pad a fourth time will reselect the 2-hour

default time.

The display will show Clean, and the Start indicator

will blink under the selected cleaning cycle time.

3. Press the START/SET pad to start the cycle.

The display will show Clean and the selected cleaning

cycle time, and the Lock icon will blink until the door is

locked. Then the Lock icon will stay on until the cycle is

over and the oven temperature is below 350 °F (177 °C).

The oven temperature will rise and hold the preset

self-clean temperature for the duration of the selected

cleaning cycle. The display will count down the cleaning

cycle in minutes and hours.

When the time elapses, the oven will turn o and beep

6 times. End will show in the display and the Lock icon

will blink. When the oven temperature falls below 350 °F

(177 °C), the door unlocks and the Lock icon turns o.

4. Press the OFF/CLEAR pad.

The display will go back to showing the time of day.

User manual NX58H5 Series_DG68-00526A_EN+CFR.indb 73 08/02/2014 12:02:40

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 83 84

No comments

Samsung NX58H5600SS Owner's Manual Page 73