
28
REFERENCE
REFERENCE
Please read the below information before update
procedure.
Introduction
The following events may interrupt the update
procedure and may result in permanent
damage to DVD-Player
• Unplugging the power cord.
• Power outage.
• Dirt or Scratch in the discs.
• Open a tray door during processing.
Playback can only support English Subtitle.
If you have any question or any problem, please
feel free to contact your nearest SAMSUNG
Service Center and agency.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R disc,
using the following settings.
1.Download the software update file from the
Samsung Internet Site
(http://www.samsung.com) After checking your
DVD-Player Model name on the rear, down-
load a file using the Search Your Model/Name
window
2.
Write the file to disc using CD-R driver of your
computer.Software update file name:
NP7CA.rom Please do not change the file
name. If you change the file name, DVD-PLAY
ER do not recognize the update CD-R.
Note
• Recommended Application Program
- Nero Burning / Easy CD Creator.. etc
• Option
- Multisession; No Multisession
- CD close or Finalized CD
Firmware upgrade
Update procedure
1.
Insert the update CD-R disc with the software
update. It takes about 10 seconds to load the
update disc.
2.
READING appears at the left upper side of the
screen.
READING
3
ERASE and WRITE appears in turn at the
same location for about 40 sec during firmware
update
4.
It will be displayed DONE if the update is com
pleted successfully.
5.
If the unit was succesfully updated, the unit will
turn off
eject the update disc by using the
OPEN/CLOSE button once the unit turns on.
6.
Firmware update is ended. Turn on your player
In order to check new version like the upper,
press the INFO button after opening a tray.
Note
-
The display can be changed depend on its
version and without any notice.
ERASE
RETR 00
DONE
RETR 00
Code Ver :xxxxx
Servo Ver:xxxxx
Comments to this Manuals