Samsung HT-P10 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 31
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
GB
1817
OPERATION
2
Load a disc.
Depending on the content of the disc, the initial screen may appear different.
1
Press OPEN/
CLOSE button to
open the disc tray.
3
Press OPEN/
CLOSE button to
close the disc tray.
Place a disc gently into the
tray with the disc’s label
facing up.
Note
To stop playback, press STOP during playback.
If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
To resume playback, press PLAY/PAUSE ( ) button again.
DVD VCD CD
Playback starts automatically.
MP3
Depending on the recording mode, some MP3-CDs may not play.
Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
MP3 file support: MPEG1 LAYER3 (BITRATE : 128KBPS~320KBPS ,
SAMPLEING FREQ.: 32K/44.1K/48KHz)
Note
2
In Stop mode, use
to select
the album, and then
press the ENTER
button.
The MP3 menu screen will appear and
playback will start.
The appearance of the menu depends on
the MP3 disc.
1
Press the
OPEN/CLOSE button
to open the disc tray,
and then load the
MP3 disc.
4
Press the STOP
button to stop
playback.
To select another album and track,
repeat Steps 2 and 3 above.
3
To change the album,
use to
select another album
in Stop mode, and
then press the
ENTER button.
Disc Playback
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
MP3-CD Playback
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
By default, the video format is set to "PAL".
"NTSC" or "PAL" will appear in the display.
At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
Page view 9
1 ... 9 10 11 ... 31

Comments to this Manuals

No comments