
10_ setting up
25mm
25mm
at least 50mm
at least 50mm
setting up your side-by-side
refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on the purchase of your Side-By-Side Refrigerator.
We hope you will enjoy the many state-of-the-art features and effi ciencies that this new appliance has to offer.
Selecting the best location for the refrigerator
• Select a location with easy access to the water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level) fl ooring.
• Select a location with enough space for the refrigerator doors to open easily.
• Allow suffi cient space to install the refrigerator on a fl at surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Overall space required in use. Refer to drawing and dimension as below.
When moving your refrigerator
To prevent fl oor damage be sure the front levelling
legs are in the up position (above the fl oor). Refer to
‘Levelling the refrigerator’ in the manual (at page 14).
To protect the fi nish of the fl ooring, place the
protection sheet such as packing carton under the
refrigerator.
When installing, servicing or cleaning
behind the refrigerator, be sure to pull the
unit straight out and push back in straight
after fi nishing.
Leg
Screw Driver
CAUTION
DA99-02208B-03.indb Sec4:10DA99-02208B-03.indb Sec4:10 2016. 3. 19. 10:242016. 3. 19. 10:24
Comments to this Manuals