Samsung RF263BEAESP User Manual download pdf (Page 15)

operating _15

02 OPERATING

Operating your French Door

Refrigerator

USING THE CONTROL PANEL

( 1 ) Energy

Saver

Hold 3 sec for

°C↔°F

Touching this button turns Energy Saver

mode on and off. When you turn Energy

Saver on, the Energy Saver icon lights.

Turn Energy Saver off and the icon

goes off. The Energy Saver function

automatically turns on when power is

supplied to the refrigerator.

If condensation or water drops appear

on the doors, turn the Energy Saver

mode off.

Touch and hold this button for 3

seconds to switch the temperature units

between °C and °F.

( 2 ) Freezer

(Hold 3 sec

for Power

Freeze)

Touch this button to set the freezer to

your desired temperature.

You can set the temperature between

-8 °F and 5 °F (between -23 °C and

-15 °C). Touch and hold this button for

3 seconds to decrease the time needed

to freeze products in the Freezer. It can

be helpful if you need to quickly freeze

easily spoiled items or if the temperature

in the freezer has warmed dramatically

(For example, if the door was left open).

( 3 ) Ice

Type/Water

Hold 3 sec for

Filter Reset

Touch this button to select the ice or

water function. You can select water or

the types of ice(cubed/crushed ice).

Each time you press the button, the

cubed and crushed

ice modes alternate and the Cubed or

Crushed ice icon lights up, indicating

your selection.

After you replace the water ﬁ lter, touch

and hold this button for 3 seconds to

reset the water ﬁ lter life indicator.

( 4 ) Alarm

Hold 3 sec for

Lighting

To turn the door open alarm on and off

If the door alarm is set to On, an alarm

beeps if any refrigerator door is left open

for more than three minutes.

The beeping stops when you close the

door. The door alarm function is preset

to On in the factory. You can turn it

off by touching and then releasing this

button. You can turn it back on in the

same fashion. The icon lights up when

the function is on.

If you touch and hold the Alarm/Lighting

button for 3 seconds, the dispenser LED

Lamp will stay on.

( 5 ) Fridge

Hold 3 sec for

Power Cool

Touch this button to set the fridge to

your desired temperature. You can set

the temperature between 34 °F and

44 °F (between 7 °C and 1 °C). Touch

and hold this button for 3 seconds

to decrease the time needed to cool

products in the Refrigerator. It can be

helpful if you need to quickly cool easily

spoiled items or if the temperature in

the fridge has warmed dramatically (For

example, if the door was left open).

( 6 ) Ice Off

Hold 3 sec for

Child Lock

If you don’t want to make more ice,

touch the Ice Off button.

Touching this button for 3 seconds turns

on Child Lock which locks the display

panel and dispenser buttons so the

buttons can not be used. The Child Lock

icon lights up to indicate you’ve activated

the Child Lock function. Press 3 seconds

to unlock.

( 7 ) Ice Off

If you don’t want to make more ice,

touch the Ice Off button.

The icon will light up and the Ice-Maker

stops making ice.

We recommend you to stop ice

making if the following occur:

There is enough ice in the ice bucket.

You want to save water and energy.

- Water is not being supplied to

the refrigerator.

If the ice maker function is

ON, and the water Line is not

connected, there will be a water

valve noise from the back of the

unit, press the Ice Off (Hold 3sec

for child lock) button for less

than 3 seconds until the Ice Off

Indicator (

) illuminates.

(RF263T**)

(RF263B/N**)

DA68-02615D(0.0).indb 15DA68-02615D(0.0).indb 15 2012.7.11 8:16:30 PM2012.7.11 8:16:30 PM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

Comments to this Manuals

No comments

Samsung RF263BEAESP User Manual Page 15

Comments to this Manuals

Related products and manuals for Fridges Samsung RF263BEAESP