Samsung RM25KGRS User Manual download pdf (Page 24)

ADJUSTING THE HEIGHT BETWEEN THE DOORS

If the Arctic Select Zone Door is lower than the Fresh Select Zone Door.

adjustment part

Arctic Select Zone

Fresh Select Zone

2) Unscrew the adjuster-phillips screw (

➂

) two times turns to rotate the adjuster.

1) Locate the height-adjuster (➀) in the Arctic Select Zone.

Unscrew the four phillips screws (➁) slightly to loose the door.

The adjuster in the Fresh Select Zone can be used in the same way.

NOTE

3) Find the best adjuster-level to align the door gap.

- Rotate down the adjuster-face with

2.0 number to reduce the door gap.

- The number of the adjuster to rotate depends on the gap.

Fresh Select Zone Door

gap

Arctic Select Zone Door

CASE) The gap is about 2mm (0.08inch) as shown below.

reference plane

After adjustment, tighten the screws (

➁ & ➂

) in reverse order.

➂

➁

➀

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

No comments

Samsung RM25KGRS User Manual Page 24