Samsung RS26DDAWP User Manual download pdf (Page 20)

20_ setting up

setting up your side-by-side refrigerator

INSTALLING THE WATER LINE(CONT’D)

Connecting the water line to the refrigerator

1. Remove the cap from water line on the unit and insert compression nut to the water line on the

unit after disassembling from provided water line.

2. Connect both water line from the unit and water line in the kit.

3. Tighten the compression nut onto the compression tting. There should be no gaps between

(A, B & C)

4. Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut o 6.5mm of the plastic tubing to make

sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined.

• Samsung Warranty does not cover WATER LINE INSTALLATION.

• It will be done at customer’s charge unless the retail price

includes installation cost.

• Please contact Plumber or Authorized Installer for the installation

if needed.

• If Water leakage occurs due to improper installation, Please

contact installer.

When using power cord

To prevent power cord damage, after product installation, arrange

the remaining power cord to the unit cover and x.

 

CAUTION

Loosen a

Remove

cap

Water Line

from unit

Water Line

from unit

No gap

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

No comments

Samsung RS26DDAWP User Manual Page 20