Samsung RS62K6007S8 User Manual download pdf (Page 51)

English 51

Maintenance

4. Turn the cartridge knob clockwise to

lock into place.

5. Press and hold Filter Reset on the

feature panel for 3 seconds to reset the

lter lifecycle. The lter indicator (

)

turns off.

6. When replacing is complete, ush 4

liters of water to remove impurities

from the water line. See the Flushing

section for more information.

NOTE

• A newly installed lter may cause the water dispenser to spurt water briey. This is

because air has entered the waterline.

• This replacement process may involve the refrigerator to drip water onto the oor. If

this happens, wipe up with dry cloths.

Reverse osmosis water ltration system

The water pressure of the water supply system to a reverse osmosis water ltration

system must be between 35 psi and 120 psi (241 kPa and 827 kPa).

The water pressure of the reverse osmosis water ltration system to the refrigerator’s

cold water line must be at least 40 psi (276 kPa). If the water pressure is below the

specied:

• Check to see whether the sediment lter in the reverse osmosis system is blocked.

Replace the lter if necessary.

• Rell the water tank in the reverse osmosis system with water.

• If your refrigerator has a water lter, it may further reduce the water pressure when

used in conjunction with a reverse osmosis system. Remove the water lter.

For more information or servicing, contact a licensed plumbing professional.

Ordering a new lter

To purchase a new water lter, contact a local Samsung service centre.

Lamps and anti-bacteria lter

Neither lamps nor the anti-bacteria lter are user-serviceable. Do not attempt to replace

them yourself. To replace them, contact a local Samsung service centre.

Untitled-12 51 7/26/2017 4:43:39 PM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 111 112

No comments

Samsung RS62K6007S8 User Manual Page 51