Samsung RSE8KPAS User Manual download pdf (Page 20)

INSTALLATION OF THE REFRIGERATOR

• Check the dimensions of your entrance door to determine whether the refrigerator can

pass through it.

• Moving refrigerator through door if depth or width of refrigerator is bigger than door’s,

removes refrigerator doors.

Checking the Dimensions of your Entrance Door

NOTE

• Select a location with easy access to the water supply.

• Select a location with enough space for the refrigerator.

• Select a location without direct exposure to sunlight.

• Before disassembling the freezer door, the water supply line needs to be disconnected.

(If not, the water supply line can be damaged.)

• See “Separating the water supply line from the refrigerator” on the next page.

Selecting the Location for the Refrigerator

Allow sufficient space to install the refrigerator on a flat surface.

• If your refrigerator is not level, the internal cooling system may not work correctly.

CAUTION

• Be careful when you openÄthe door in full

swing.ÄIt might come in contact with its adja-

cent units.

CAUTION

INSTALLATION INSTRUCTIONS

Loading Plan

When you install the refrigerator, it is recommended that the

clearance be maintained as much as specified below.

To get the sufficient Energy efficiency, keep the clearance of the

back side more than 10Cm and follow the Loading Plan.

To get more space remove the upper box in the freezer and all

boxes in the fresh food compartment since it does not effect

satisfactory thermal and mechanical characteristics.

NOTE

501mm428mm

940mm

600mm

125

940mm

600mm

For fitting proud of adjacent units

at least 26mm at least 26mm

Epel pjt IB-01453B-EN (0.1) 4/15/05 1:17 PM Page 19

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 37 38

No comments

Samsung RSE8KPAS User Manual Page 20