Samsung RSE8KPAS User Manual download pdf (Page 28)

INSTALLATION INSTRUCTIONS

ADJUST THE CLEARANCE BETWEEN THE DOORS

Making small adjustments between doors.

If the door of freezer is higher or lower than that of the refrigerator.

3) After adjusting the doors, turn the nut (①) clockwise( ) until the lower end of the bolt, then tighten the

bolt again with the wrench (➂) to fix the nut(①).

If you do not fix the nut (

①

)firmly, the bolt (

➁

) may be released.

2) Please adjust the height difference between the doors turning the bolt (➁) clockwise( ) or

counter

clockwise

( ).

When you turn clockwise ( ), the door goes up.

➂ WRENCH

➀ NUT

➁ BOLT

➀ NUT

➁ BOLT

➂ WRENCH

➁ BOLT

Please open the doors and adjust the doors as follows:

1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).

When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little

counter

clockwise.

Loosen the nut(①) with your finger.

NOTE

➀ NUT

Adjustment part

Epel pjt IB-01453B-EN (0.1) 4/15/05 1:17 PM Page 27

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

No comments

Samsung RSE8KPAS User Manual Page 28