Samsung SRF731GDLS User Manual download pdf (Page 11)

operating _11

02 OPERATING

4. Turn water on and check for any leakage. If you

ﬁnd water drops or leakage in the connection

areas, turn off the main water supply. Check the

connections and, if nescessary, tighten.

Only connect the water line to a drinkable

water source.

If you have to repair or disassemble the water line,

cut off 6.35mm of the plastic tubing to make sure

you get a snug, leak-free connection.

COMPLETING THE SET UP

Now that you have your new refrigerator installed in

place, you are ready to set up and enjoy the features

and functions of the appliance. By completing the

following steps, your refrigerator should be fully

operational.

1. Make sure your refrigerator is in an appropriate

location with reasonable clearance between it and

the wall. Refer to installation instructions in this

manual.

2. Once the refrigerator is plugged in, make sure the

interior light comes on when you open the doors.

3. Set the Temperature control to the coldest

temperature and wait for an hour. The freezer

will get slightly chilled and the motor will run

smoothly. Reset the refrigerator and freezer to the

temperatures you want.

4. After you plug the refrigerator in, it will take a few

hours to reach the appropriate temperature. You

can store food and drinks in the refrigerator after

the temperature is sufﬁciently cool.

Operating your French Door Refrigerator

USING THE CONTROL PANEL

910

DA68-02481C(EN)-0.0.indd 11 2011.4.1 8:44:7 AM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Samsung SRF731GDLS User Manual Page 11