Mobile PATA
Spinpoint M5P
60GB 80GB 120GB 160GB
Model 8 MB
HM061GC HM080GC HM121HC HM160HC
FEATURES
• Max. 160GB formatted capacity per disk • ATA Security Mode Feature Set
• Ultra DMA Mode 5(UDMA100) Compatible • ATA S.M.A.R.T. Feature Set
• TuMR/PMR head with FOD technology • SilentSeek™
• Support Automatic Acoustic Management(AAM) • NoiseGuard™
• Load/Unload Head Technology
Capacity
60GB/80GB/120GB/160GB
Temperature
Interface
UDMA 100 Operating
5 ~ 55 ℃
Buffer DRAM Size
2
8 MB Non-operating
-40 ~ 70 ℃
Byte per Sector
512
Humidity (non-condensing)
Rotational Speed
5,400 RPM Operating 5 ~ 90 %
Non-operating 5 ~ 95 %
Linear Shock (1/2 sine pulse)
Average Seek time (typical)
12 ms Operating(2ms) 325 G
Average Latency
5.6 ms Non-operating(1ms) 1000 G
Media Transfer Rate (Max.)
826Mbits/s
Vibration
Interface Transfer Rate (Max.)
100MB/s Operating(10~500Hz) 0.7Grms
Drive Read
Time
t
ical
3
4 sec
Altitude (relative to sea level)
Operating -300 to 3000 m
Non-operating -400 to 15000 m
Non-recoverable Read Error
1 sector in 10
14
bits
Controlled Ramp Load/Unload
600,000
PHYSICAL DIMENSION
Height (Max.)
9.5 mm
Width
69.85 mm
Idle (typical)
2.2 Bel
Length
100 mm
Performance Seek (typical)
2.4 Bel
Weight (avg.)
96 g
* Note : Design and specifications are subject to change without prior notice.
Voltage +5V±5%
1.1MB = 1,000,000 Bytes, 1GB = 1 Performance Seek 2.1 Bel
Spin-up Current (Max.) 900 mA
Accessible capacity may vary as some OS uses binary numbering system
Seek
t
ical
4
2.1 W
for reported capacity
Read/Write (typical) 2.0 W
2 Upper 128 KB is used for firmware
Low Power Idle (typical) 0.6 W
3 Power-On to Drive Ready
Standby (typical) 0.25 W
4 30% duty cycle, random seek
Sleep (typical) 0.1 W
5 Power requirements based on enabled DIPM & 1.5Gbps speed
2.5" HDD product specification Rev 1.0
Match with product manual Rev 00
RELIABILITY SPECIFICATIONS
POWER REQUIREMENTS
ACOUSTICS
Capacity
DRIVE CONFIGURATION ENVIRONMENTAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
Comments to this Manuals