Samsung SV-2000DS User Manual Page 69

  • Download
  • Add to my manuals
  • Print
  • Page
    / 266
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 68
Mitel SX-50 (Inband)
Issue 1-0 Integration Notes
65
Mitel SX-50 (Inband)
Integration Note s
Required Hardware and Software
Software requirements: Generic MS55-MR5-PR5-G07.11 or higher.ONS Line Card, part num-
ber 9104-020-002
Each Voice Mail port requires a port from this card.
LS/GS Line Card, part number 9104-030-004
Each Voice Mail port requires a port from this card.
Voice Mail Availability
This phone system is available on these Voice Mail systems:
NVM-22CA with software version 8.01 or higher
NVM-202exCA with software version 7.01 or higher
NVM-2000CA with software version 8.01 or higher
Phone System Programming
General Programming Information
Since the SX-50 uses “loop back trunks” when integrating with the Voice Mail, any incoming
call is “looped back” on a trunk into the Voice Mail, after the Voice Mail Master Extension
number is dialed.
The SX-50 uses Abbreviated Dialing and Automatic Route Selection for this type of
integration.
You will need the Mitel SX-50 Technical Practices to complete this programming.
Command 100 SYSTEMS OPTIONS PROGRAMMING
The following registers require entries that are different from the default values:
Register 05 TRUNK CONNECTIONS
Bit c: CO to CO Connections
Enter 1 to Enable this bit.
Register 09 FEATURES SELECTION 1
Bit h: Abbreviated Dial Access
Enter 1 for 3-digit index number (900 entries maximum)
Register 11 TIME OUT SELECTION
Bit g: Call Forward No Answer Timeout
Enter 2 for 20 seconds.
Register 12 MESSAGE WAITING
Bit c: Message Waiting System Enable
Enter 1 to Enable with Lamps
Bit d: Message Waiting Indication
Enter 0 for Always.
Bit f: Message Waiting Automatic Cancel
Enter 0 to Disable.
Register 13 AUTOMATIC ROUTE SELECTION (ARS)
Bit c: ARS Enable
Enter 1 to Enable.
Bit f: ARS Return Dial Tone
Enter 1 to Enable.
Bit h: Attendant ARS Routing Class of Service
Enter 1 for RCS 1.
Bit i: ARS Interdigit Timeout
Enter 0 for 5 seconds.
Bit j: Abbreviated Dial ARS Bypass Enable
Enter 1 to Enable.
Page view 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 265 266

Comments to this Manuals

No comments