English - 6
Installing Batteries in the Remote Control
1.
2. Install two
AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
3. Replace the cover
.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
The remote control can be used up to about 23 feet from the
TV.
(Assuming typical TV usage, the batteries should last for about one year.)
Using the remote control with the ON/OFF
light button set to On will reduce the
battery usage time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
➣
➣
➣
➣
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
1.
Press the ON/OFF
light button.
Pressing the ON/OFF
light button toggles between ON and OFF.
When ON, the button backlight is turned on for a moment.
Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If
you touch or move the remote control and the motion is detected by the sensor of the remote control, the button
backlight will be turned on for a moment.
Since there is a vibrating device inside the remote control, shaking the remote control will result in a sound
generated by the device.
The button backlight will not be turned on when the remote control is turned off.
➣
➣
➣
➣
➣
1470A-03Eng.indb 6 2008-08-11 2:21:13
Comments to this Manuals