
24
English
Basic Features
¦ Sound Systems, Etc.
MENU
m
→ Sound → ENTER
E
■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is
used to provide digital sound, reducing interference going to
speakers and various digital devices such as a DVD player.
– Audio Format: You can select the Digital Audio output
(SPDIF) format.
✎
The available Digital Audio output (SPDIF) format
may differ depending on the input source.
– Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
(It's not available for TB300 series.)
Speaker Settings
■ Speaker Select (External Speaker / TV Speaker):A sound
echo may occur due to a difference indecoding speed
between the main speaker and theaudio receiver. In this
case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker,
the volume and MUTE buttons will not operate and
the sound settings will be limited.
✎
When Speaker Select is set to External Speaker.
x
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.
✎
It's not available for TB300 series.
■ Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience
compared to Normal mode, making almost no noise. It is
useful at night.
Reset Sound (Yes / No)
Reset all sound settings to the factory defaults.
System Menu
¦ Setting the Time
MENU
m
→ System → ENTER
E
Time
■ Clock Set: Set the Day, Month, Year, Hour and Minute
manually.
✎
You can set the Day, Month, Year, Hour and Minute
directly by pressing the number buttons on the
remote control.
Using the Sleep Timer
■ Sleep Timer
t
: Automatically shuts off the LED
display after a preset period of time. (30, 60, 90, 120, 150
and 180 minutes).
✎
To cancel Sleep Timer, select Off.
Setting the On / Off Timer
■ On Timer
On Timer 1 / On Timer 2 / On Timer 3 : Three different on
timer settings can be made. You must set the clock fi rst.
On Timer 1
Setup Off
Time
0:00
Volume
20
Source
TV
Channel
1
Sun
Mon
Tue
Wed
Thu
Fri
Sat
R
Return
Close
• The displayed image may differ depending on the model.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at your convenience. If you
select Manual, you can set up the day you want to activate
the timer.
✎
The
c
mark indicates the day you've selected.
Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: Select a desired input source when the LED
display is turned on automatically. (USB can be selected
only when a USB device is connected to the LED display)
Comments to this Manuals