Samsung T24E391AK User Manual download pdf (Page 62)

Setting up Anynet+ (HDMI-CEC)

• Anynet+ (HDMI-CEC)

To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

✎

When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

• Auto Turn Off

Set an Anynet+ Device to turn off automatically when the product is turned off.

✎

If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.

✎

May not be enabled depending on the device.

Switching between Anynet+ Devices

1. Open the Tools menu using your remote, and then select Anynet+ (HDMI-CEC).

2. Select a device, and then wait until the switch to the selected device is completed.

✎

The menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.

✎

Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while

switching is in progress.

✎

If you have selected an Anynet+ device using the Source function , you cannot use the Anynet+ function.

Make sure to switch to an Anynet+ device.

English - 62 English - PB

Advanced Features

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

No comments

Samsung T24E391AK User Manual Page 62